Call 08048953217 74% Response Rate

our range

Plastic Roofing Sheets

Important Guidelines for Installation, Handling & Storage(1) The entire structure or the portion thereof to be sheeted has to be correctly aligned and uniformly leveled.(2) The m1a.x5im mum = p 5u0rl0in ms dims -t a7n0c0e m recommended are as follows:1. THIS IS FOR 3 LAYER QUALITY.2 MM Thickness = 2.50 Feet Purlin Distances. 2.5 MM Thickness = 2.75 Feet Purlin Distances. 3 MM Thickness = 3.00 Feet Purlin Distances. 3.5 MM Thickness = 3.25 Feet Purlin Distances. 4 MM Thickness = 3.50 Feet Purlin Distances.2. THIS IS FOR 4 LAYER QUALITY2 MM Thickness = 3.00 Feet Purlin Distances. 2.5 MM Thickness = 3.25 Feet Purlin Distances. 3 MM Thickness = 3.50 Feet Purlin Distances. 3.5 MM Thickness = 3.75 Feet Purlin Distances. 4 MM Thickness = 4.00 Feet Purlin Distances. (3) Cover length of fore and aft tiles: 300 mm. (4) Cover length of Right and left tiles: 80 mm. (5) Minimum 5 screws are required for 1 sq.mtr tile but at a height more than 30 feet screws are required as per wind speed. (6) It is important not to over tighten the screw putting undue pressure onto the sheets. (7) Purlin must be at the correct centers and size for the material and slope of the roof the positions of Purlin at The upper and lower ends of the roofs and at the sheet overlaps are the critical points. (8) Fix the bottom Purlin first. (9) Do not overhang the fascia by more than 25mm. If done so, the wind will tends to catch this area and will damage the roof. (10) It is generally best (although more awkward) to drill sheets perpendicular so that holes line up with the Purlin and holes in overlapping sheets line up. (11) Start fixing sheets at the opposite end of the roof from prevailing winds. (12) Drill over a firm support using light pressure with a hand drill or slow speed power drill fitted with a suitable drill bit. (13) Use “ROOF TOUCH” sheets fixer set caps to eliminate the water leaking problems and also screw rusting Problems. It will also prevent sheet riding upon the thread. (14) The self tapping screw size that is recommended as per sheets thickness are 55mm,68mm,75mm with Zylon Coated. (15) The sheets must be stacked in flat form at sites. And not to be stacked together in sunlight. (16) While installing the Turbo ventilators fans on the top of the roof, care should be taken should be affixed in such a way that there is no gap between them in order to avoid the problem of water leaking.(17)10years warrenty against use company sheets fitting guidline intruction
  • Plastic Roofing Sheets
  • Plastic Roofing Sheets
  • Plastic Roofing Sheets
  • Plastic Roofing Sheets
  • Plastic Roofing Sheets
  • Plastic Roofing Sheets
Plastic Roofing Sheets

Plastic Roofing Sheets

Rs 601  / Square MeterGet Best Price

Minimum Order Quantity: 100 Square Meter

Product Brochure

MaterialUPVC
Thickness2,2.5,3,3.5,4
ColorBLUE,GREEN,TERRACOTTA,GREY,WHITE
Thickness Of Sheet2,2.5,3,3.5,4 mm
Brand"ROOF TOUCH"
Surface TreatmentIN BUILT UV COLOR
TechniqueCORRUGATED SHEET
FeatureEXCELLENT AS PER SHEET THICKNESS
LengthCUSTOMISED
Sheet Thickness2,2.5,3,3.5,4 MM
Usage/ApplicationRESIDENTAL,COMMERCIAL,INDUSTRIAL ETE...
IZOD IMPACT STRENGTH CIPET REPORT3LAYER 2MM THICK SHEET -62.3 J/M,3MM-66.4 J/M & 4LAYER3 MM THICK SHEET-129.6 J/M.
TENSILE STRENGTH YIELD CIPET REPORT3LAYER 2MM THICK SHEET-369.1 KG/CM^2,3MM-322.2 KG/CM^2 & 4LAYER3 MM THICK SHEET-407.7 KG/CM^2.
TENSILE STRENGTH BREAK CIPET REPORT3LAYER 2MM THICK SHEET-364.5 KG/CM^2,3MM-297.1 KG/CM^2 & 4LAYER3 MM THICK SHEET-352.6 KG/CM^2.
ELONGATION YIELD CIPET REPORT3LAYER 2MM THICK SHEET-4%,3MM-8% & 4LAYER3 MM THICK SHEET-6%.
ELONGATION BREAK CIPET REPORT3LAYER 2MM THICK SHEET-20%,3MM-20% & 4LAYER3 MM THICK SHEET-30%.
ERDA FLAMMABILITY TEST REPORTMATERIAL CLASSIFICATION (V-0). EXCELLENT AND FIRE RETARDENT

“ROOF TOUCH” 3 & 4 LAYER UPVC ROOFING SHEETS”

Top layer - Is of Anti UV layer which is specially make to improve optical properties. Surface Layer- The material is ultra weather resistant; to block the ultra violet and reduce the coefficient of heat conductivity, ensure product durabipty and resistance to chemical corrosion.
Second layer - contains multi foam giving to the material light weight and improved sound and thermal insulating properties.
Third layer - It is specially inputs as fiber glass or steel net (can be customize as per customer) to make sheet more durable, give high strength to sheet, to improve bending problems compare to regular UPVC roofing sheets.
Underlying layer - for just a good material toughness special to ensure the strength at the same time, increase the rigidity and light illumination
4 layer UPVC roofing sheet has almost 10 times more higher mechanical strength compare to three layer UPVC roofing sheet. 4 layer UPVC roofing sheet has better resistance to bending problem than three layer UPVC roofing sheet. Hence this can give the better advantages comparing to other roofing sheets.

WE ARE OFFRING BEST QUALITY 3 & 4 LAYER UPVC ROOFING SHEETS WITH ALL ACCESSORIES.  
1.Heat Insulation reduces outside heat by 10% to 35% thermal conductivity 0.104 W/M*c at least 100 times less than metal sheets.
2.water resistance self cleaning system
3.corrosion resistance -acid-proof, alkali-proof insensitive to most chemicals
4.sound insulation -high frequency noise reduced by 6 times, low frequency noise reduced by 3 times
5.highly durable-tensile strength: above 25 MPA flexural strength: above 50 MPA impact strength: passes all testing parameters
6.fire retardant -oxygen index:35 c smoke consistency:SDR=55 horizontal firing: grade Fv-0 flat burning:FH-1 class B1 retardant
7.ost effective-save construction cost up to 50%
8.easy installation as light weight
9.easy workability it can be nailed drilled& sawn
10.Eco workability it can nailed drilled & sawn
11.long life long life and high weather ability
12.utilization efficiency up to 95%



Additional Information:

  • Production Capacity: 2500 SQ.MT
  • Delivery Time: 15 WORKING DAYS
  • Packaging Details: AS PER ORDER QUANTITY

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES