Moon Pvc Roofing

Moon Pvc Roofing

Moon Pvc Roofing

Surat, Gujarat

GST No. 24ABJFM7697M1ZD
TrustSEAL Verified

Corrugated Roofing Sheet

Important Guidelines for Installation, Handling & Storage(1) The entire structure or the portion thereof to be sheeted has to be correctly aligned and uniformly leveled.(2) The m1a.x5im mum = p 5u0rl0in ms dims -t a7n0c0e m recommended are as follows:1. THIS IS FOR 3 LAYER QUALITY.2 MM Thickness = 2.50 Feet Purlin Distances. 2.5 MM Thickness = 2.75 Feet Purlin Distances. 3 MM Thickness = 3.00 Feet Purlin Distances. 3.5 MM Thickness = 3.25 Feet Purlin Distances. 4 MM Thickness = 3.50 Feet Purlin Distances.2. THIS IS FOR 4 LAYER QUALITY2 MM Thickness = 3.00 Feet Purlin Distances. 2.5 MM Thickness = 3.25 Feet Purlin Distances. 3 MM Thickness = 3.50 Feet Purlin Distances. 3.5 MM Thickness = 3.75 Feet Purlin Distances. 4 MM Thickness = 4.00 Feet Purlin Distances. (3) Cover length of fore and aft tiles: 300 mm. (4) Cover length of Right and left tiles: 80 mm. (5) Minimum 5 screws are required for 1 sq.mtr tile but at a height more than 30 feet screws are required as per wind speed. (6) It is important not to over tighten the screw putting undue pressure onto the sheets. (7) Purlin must be at the correct centers and size for the material and slope of the roof the positions of Purlin at The upper and lower ends of the roofs and at the sheet overlaps are the critical points. (8) Fix the bottom Purlin first. (9) Do not overhang the fascia by more than 25mm. If done so, the wind will tends to catch this area and will damage the roof. (10) It is generally best (although more awkward) to drill sheets perpendicular so that holes line up with the Purlin and holes in overlapping sheets line up. (11) Start fixing sheets at the opposite end of the roof from prevailing winds. (12) Drill over a firm support using light pressure with a hand drill or slow speed power drill fitted with a suitable drill bit. (13) Use “ROOF TOUCH” sheets fixer set caps to eliminate the water leaking problems and also screw rusting Problems. It will also prevent sheet riding upon the thread. (14) The self tapping screw size that is recommended as per sheets thickness are 55mm,68mm,75mm with Zylon Coated. (15) The sheets must be stacked in flat form at sites. And not to be stacked together in sunlight. (16) While installing the Turbo ventilators fans on the top of the roof, care should be taken should be affixed in such a way that there is no gap between them in order to avoid the problem of water leaking.(17)10years warrenty against use company sheets fitting guidline intruction

Corrugated Roofing Sheets

REQUEST CALLBACK
  • Corrugated Roofing Sheets
  • Corrugated Roofing Sheets
  • Corrugated Roofing Sheets
  • +10 Corrugated Roofing Sheets

Get Best Quote

Approx. Rs 751 / Square MeterGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity100 Square Meter
Surface TreatmentIN BUILT UV COLOR
Area Of ApplicationResidential & Commercial
Thickness Of Sheet2,2.5,3,3.5,4 MM
Thickness2,2.5,3,3.5,4 MM
ColorWHITE,BLUE,GREY,GREEN,TERRACOTTA
Brand"ROOF TOUCH"
Usage/ApplicationCOMMERCIAL & RESIDENTAL
MaterialUPVC
Packaging TypeAS PER ORDER QUANTITY
ShapeTrapezoidal
Heat ConductivityMINIMUM 40% NOT PASS FROM UPVC SHEET
Impact Strength3LAYER 2MM THICK SHEET -62.3 J/M,3MM-66.4 J/M & 4LAYER3 MM THICK SHEET-129.6 J/M.
Service Temperature---------
Thermal ExpansionNO
LengthCUSTOMISED
Overall Width1130 MM
Effective Cover Width1050 MM
Coating ThicknessIN BUILT UV COLOR PIGMENT
Standard LengthCUSTOMISED
WeightAS PER SHEET THICKNESS
Weight Of Sheet Per Sq Mtr AreaAS PER SHEET THICKNESS
Material GradeUPVC VERGIN
FeaturesEXCELLENT STRENGTH
Extra Strength3LAYER 2MM THICK SHEET-369.1 KG/CM^2,3MM-322.2 KG/CM^2 & 4LAYER3 MM THICK SHEET-407.7 KG/CM^2.
Running Length8,10,12,20 FEET
Light Transmittance %POAQUE
DensityEXCELLENT AS PER SHEET THICKNESS
Size1130 MM WIDTH
Tensile Strength3LAYER 2MM THICK SHEET-364.5 KG/CM^2,3MM-297.1 KG/CM^2 & 4LAYER3 MM THICK SHEET-352.6 KG/CM^2.
Yield StrengthEXCELLENT AS PER SHEET THICKNESS
Pitch6 NUMBER
FinishGLOSY CORRUGATED PROFILE
Light TransmittanceOPAQUE
Manufacturing TechniqueCORRUGATED SHEET
No. Of Layers3 AND 4 LAYER QUALITY
Min. Roof SlopeAS PER SHED WIDTH,LENGTH,HIGHT & RAIN FLOW
Supply Width1130 MM
Dimensions----
Rib Height---------------
Tensile StengthEXCELLENT AS PER SHEET THICKNESS
Thermal ConductivityNO
WaterproofYES
HandmadeFULLY AUTOMATIC EXTRUDER MACHINE PRODUCT
No. Of Ply4 AND 3 LAYER
I Deal InNew Only
Packaging SizeAS PER ORDER QUANTITY
PatternCORRUGATED PROFILE SHEET
Resin TypePVC VERGIN MATERIAL
TechniqueEXTRUDER MACHINE PROCESS
ToleranceEXCELLENT AS PER SHEET THICKNESS
WallYOU CAN USE FOR SHED WALL PURPOSE
Warranty10 YEARS AGAINST COMPANY SHEETS FITTING GUID LINE INTRUCTION
Is It Water ProofWater Proof
Top CoatingUV IN BUILT COLOR PIGMENT
BottomcoatingWHITE PVC

“ROOF TOUCH” 3 & 4 LAYER UPVC ROOFING SHEETS”

Top layer - Is of Anti UV layer which is specially make to improve optical properties. Surface Layer- The material is ultra weather resistant; to block the ultra violet and reduce the coefficient of heat conductivity, ensure product durabipty and resistance to chemical corrosion.
Second layer - contains multi foam giving to the material light weight and improved sound and thermal insulating properties.
Third layer - It is specially inputs as fiber glass or steel net (can be customize as per customer) to make sheet more durable, give high strength to sheet, to improve bending problems compare to regular UPVC roofing sheets.
Underlying layer - for just a good material toughness special to ensure the strength at the same time, increase the rigidity and light illumination
4 layer UPVC roofing sheet has almost 10 times more higher mechanical strength compare to three layer UPVC roofing sheet. 4 layer UPVC roofing sheet has better resistance to bending problem than three layer UPVC roofing sheet. Hence this can give the better advantages comparing to other roofing sheets.

WE ARE OFFRING BEST QUALITY 3 & 4 LAYER UPVC ROOFING SHEETS WITH ALL ACCESSORIES.  
1.Heat Insulation reduces outside heat by 10% to 35% thermal conductivity 0.104 W/M*c at least 100 times less than metal sheets.
2.water resistance self cleaning system
3.corrosion resistance -acid-proof, alkali-proof insensitive to most chemicals
4.sound insulation -high frequency noise reduced by 6 times, low frequency noise reduced by 3 times
5.highly durable-tensile strength: above 25 MPA flexural strength: above 50 MPA impact strength: passes all testing parameters
6.fire retardant -oxygen index:35 c smoke consistency:SDR=55 horizontal firing: grade Fv-0 flat burning:FH-1 class B1 retardant
7.ost effective-save construction cost up to 50%
8.easy installation as light weight
9.easy workability it can be nailed drilled& sawn
10.Eco workability it can nailed drilled & sawn
11.long life long life and high weather ability
12.utilization efficiency up to 95%



Additional Information:

Production Capacity: 2500 SQ.MT

Delivery Time: 15 WORKING DAYS

Packaging Details: AS PER ORDER QUANTITY

Send Bulk Enquiry

Corrugated Sheet

REQUEST CALLBACK
  • Corrugated Sheet
  • Corrugated Sheet
  • Corrugated Sheet
  • +10 Corrugated Sheet

Get Best Quote

Approx. Rs 550 / Square MeterGet Latest Price

Product Brochure

Product Details:

Minimum Order Quantity100 Square Meter
MaterialUPVC
Surface TreatmentUV IN BUILT COLOUR
Usage/ApplicationALL ROOFING PURPOSE
Packaging TypeAS PER ORDER
Brand"ROOF TOUCH"
Thickness Of Sheet2,2.5,3,3.5 & 4 MM
Manufacturing TechniqueTRAPEZODIAL
ColorBLUE,GREEN,WHITE,TERRACOTTA,GREY
LengthCOSTUMISED
ShapeCORRUGATED SHEET

           “ROOF TOUCH” 3 & 4 LAYER UPVC ROOFING SHEETS”

Top layer - Is of Anti UV layer which is specially make to improve optical properties. Surface Layer- The material is ultra weather resistant; to block the ultra violet and reduce the coefficient of heat conductivity, ensure product durabipty and resistance to chemical corrosion.
Second layer - contains multi foam giving to the material light weight and improved sound and thermal insulating properties.
Third layer - It is specially inputs as fiber glass or steel net (can be customize as per customer) to make sheet more durable, give high strength to sheet, to improve bending problems compare to regular UPVC roofing sheets.
Underlying layer - for just a good material toughness special to ensure the strength at the same time, increase the rigidity and light illumination
4 layer UPVC roofing sheet has almost 10 times more higher mechanical strength compare to three layer UPVC roofing sheet. 4 layer UPVC roofing sheet has better resistance to bending problem than three layer UPVC roofing sheet. Hence this can give the better advantages comparing to other roofing sheets.

WE ARE OFFRING BEST QUALITY 3 & 4 LAYER UPVC ROOFING SHEETS WITH ALL ACCESSORIES.  
1.Heat Insulation reduces outside heat by 10% to 35% thermal conductivity 0.104 W/M*c at least 100 times less than metal sheets.
2.water resistance self cleaning system
3.corrosion resistance -acid-proof, alkali-proof insensitive to most chemicals
4.sound insulation -high frequency noise reduced by 6 times, low frequency noise reduced by 3 times
5.highly durable-tensile strength: above 25 MPA flexural strength: above 50 MPA impact strength: passes all testing parameters
6.fire retardant -oxygen index:35 c smoke consistency:SDR=55 horizontal firing: grade Fv-0 flat burning:FH-1 class B1 retardant
7.ost effective-save construction cost up to 50%
8.easy installation as light weight
9.easy workability it can be nailed drilled& sawn
10.Eco workability it can nailed drilled & sawn
11.long life long life and high weather ability
12.utilization efficiency up to 95%


Additional Information:

Production Capacity: 2500 SQ.MT

Delivery Time: 15 WORKING DAYS

Packaging Details: AS PER ORDER QUANTITY

Send Bulk Enquiry

X
 





Explore More Products